Gas box pulse bag filter is a new type of gas box pulse bag filter. It integrates the advantages of all kinds of bag dust remover, overcomes the disadvantages of poor dust removal intensity of chamber back blowing and pulse jet blowing and filtering at the same time, and enlarges the application range. The product has the characteristics of chamber overall cleaning, using large size electromagnetic pulse valve cleaning form, with strong cleaning ability, good effect, long service life and other characteristics. The product is suitable for the treatment of high concentration dust, which can simplify the dust treatment process and reduce the equipment investment. The product structure is compact, covers an area of less, can reduce the construction investment. It has significant environmental, social and economic benefits, filling the domestic blank of gas-seismic pulse cleaning, and has domestic level. The gas box pulse bag filter is composed of the following parts. (1) Shell part: including cleaning room (or called gas purification tank, gas tank), filter chamber, compartment partition, access door and shell structure. The cleaning room is provided with a lifting valve and a flower plate, a short spray pipe, and the filtration room is provided with a filter bag and its skeleton. (2) ash hopper and discharge mechanism: ash hopper and according to different series, different imported dust concentration, respectively set screw conveyor, air conveying chute and rigid impeller feeder (namely discharge valve). (3) Inlet and outlet air box: including inlet and outlet air duct and middle baffle. The single row (or single row) structure is arranged on one side of the shell, and the double row (or double row) structure is arranged in the middle of the shell. Series A is small without box body, and the inlet and outlet air ducts are respectively connected to the dust hopper and the cleaning room. (4) Pulse cleaning device: including pulse valve, air bag, cylinder for lifting valve and its solenoid valve, etc. (5) Compressed air pipeline and its pressure relief device, oil-water separator, oil mist, etc. (6) pillar and vertical cage ladder, railings. Working principle of air box pulse bag dust collector Dust gas from the air inlet filter in and out of the box body wind enters from ash hopper (A series) into the inclined diaphragm turned to ash hopper, airflow speed slower at the same time, due to inertia effect, the gas in the coarse dust fall into ash hopper, tiny dust particles with air to fold up into the filter chamber, dust attached to the dust bag appearance, after purification, the upper gas through the filter bag into the clean room, It is collected by the cleaning of each sub-chamber through the air outlet and sucked out by the main fan of the dust removal system and discharged into the atmosphere. With the continuous progress of the filtration condition, the dust attached to the surface of the filter bag gradually increases, and the resistance of the airflow gradually increases. When it reaches a certain resistance value (such as 1990Pa), it can be manually according to the need, or through the constant pressure or timing dust removal pulse controller, automatically control the start of the dust collector, a chamber of the lifting valve is closed, cut off the air flow through the filter chamber, and then open the electromagnetic pulse valve to release the high-pressure compressed air, All filter bags in a sub-chamber air chamber are sprayed with pulse to clean the dust (stop the wind to clean the dust), so that each filter bag suddenly dilates, so that the dust accumulated on the surface of the bag is vibrated, so that the pressure difference between inside and outside the bag is restored to the starting state, and the dust settles into the dust hopper. Then the program controller opens the lifting valve according to the specified interval time to resume the filtering of the first chamber, and then starts the lifting valve of the sub-chamber, closes the filtering air flow of the sub-chamber, opens the solenoid valve of the sub-chamber to release the high-pressure compressed air, s the air and pulses to spray and clean all the filter bags in the sub-chamber, and removes the dust on the filter bags of the sub-chamber. After that, the program controller opens the compartment lifting valve to resume the compartment filtering. After that, according to the pre-prescribed electronic control procedures for the third sub-room, the fourth sub-room... Until the dust removal of the last chamber is completed, close the electric control instrument, and the dust collector will resume formal filtration and dust collection. Gas box pulse bag dust collector specifications: Gas box pulse bag filter has four series of 33 specifications. Filter area from 93-4361m2, treatment air volume from 6900m3/h to 314000m3/h, widely used in building materials, cement, metallurgy, machinery, chemical and refractory industries; It is especially suitable for dust collection system (or dust removal system) of crushing, packing, warehouse top, clinker cooling machine and various mills in cement factory. It can also be applied to dust collection by coal grinding, but the anti-fire and explosion-proof measures should be added, and the structure of dust collector should be changed accordingly. It can also be applied to dust collection of gas with high dust concentration, such as the grinding system with O-SEPa powder separator, the gas dust concentration is up to 1000g/m3(standard) above, can not be set as a cyclone dust collector for pre-dust collection. For the cold region in north China, the dust collector can be applied after adding heating and heat preservation device. Air box pulse bag dust collector structure This is a kind of bag dust collector with compartment structure and assembly type. By the chamber top electromagnetic pulse valve, each chamber filter bag is carried out in turn by compartment stop air box pulse cleaning class (namely, the so-called offline cleaning). It and general injection pulse bag filter dust, soot blowing pulse is in the same filter indoor only to which each row of filter bag line by line to blowing dust (the so-called online soot cleaning), while other row of filter bag filter is still on, namely the soot mixed with filter in a room at the same time, under the qing secondary dust float in the sky, some will be adjacent dust filter bag away, It is not conducive to the gas filtration with high dust concentration. PPC subchamber pulse is carried out in an indoor shut-off valve to stop filtering, and without stopping to change a chamber filter bag.
Gas box pulse bag filter is a new type of gas box pulse bag filter. It integrates the advantages of all kinds of bag dust remover, overcomes the disadvantages of poor dust removal intensity of chamber back blowing and pulse jet blowing and filtering at the same time, and enlarges the application range. The product has the characteristics of chamber overall cleaning, using large size electromagnetic pulse valve cleaning form, with strong cleaning ability, good effect, long service life and other characteristics. The product is suitable for the treatment of high concentration dust, which can simplify the dust treatment process and reduce the equipment investment. The product structure is compact, covers an area of less, can reduce the construction investment. It has significant environmental, social and economic benefits, filling the domestic blank of gas-seismic pulse cleaning, and has domestic level.
The gas box pulse bag filter is composed of the following parts.
(1) Shell part: including cleaning room (or called gas purification tank, gas tank), filter chamber, compartment partition, access door and shell structure. The cleaning room is provided with a lifting valve and a flower plate, a short spray pipe, and the filtration room is provided with a filter bag and its skeleton.
(2) ash hopper and discharge mechanism: ash hopper and according to different series, different imported dust concentration, respectively set screw conveyor, air conveying chute and rigid impeller feeder (namely discharge valve).
(3) Inlet and outlet air box: including inlet and outlet air duct and middle baffle. The single row (or single row) structure is arranged on one side of the shell, and the double row (or double row) structure is arranged in the middle of the shell. Series A is small without box body, and the inlet and outlet air ducts are respectively connected to the dust hopper and the cleaning room.
(4) Pulse cleaning device: including pulse valve, air bag, cylinder for lifting valve and its solenoid valve, etc.
(5) Compressed air pipeline and its pressure relief device, oil-water separator, oil mist, etc.
(6) pillar and vertical cage ladder, railings.
Working principle of air box pulse bag dust collector
Dust gas from the air inlet filter in and out of the box body wind enters from ash hopper (A series) into the inclined diaphragm turned to ash hopper, airflow speed slower at the same time, due to inertia effect, the gas in the coarse dust fall into ash hopper, tiny dust particles with air to fold up into the filter chamber, dust attached to the dust bag appearance, after purification, the upper gas through the filter bag into the clean room, It is collected by the cleaning of each sub-chamber through the air outlet and sucked out by the main fan of the dust removal system and discharged into the atmosphere.
With the continuous progress of the filtration condition, the dust attached to the surface of the filter bag gradually increases, and the resistance of the airflow gradually increases. When it reaches a certain resistance value (such as 1990Pa), it can be manually according to the need, or through the constant pressure or timing dust removal pulse controller, automatically control the start of the dust collector, a chamber of the lifting valve is closed, cut off the air flow through the filter chamber, and then open the electromagnetic pulse valve to release the high-pressure compressed air, All filter bags in a sub-chamber air chamber are sprayed with pulse to clean the dust (stop the wind to clean the dust), so that each filter bag suddenly dilates, so that the dust accumulated on the surface of the bag is vibrated, so that the pressure difference between inside and outside the bag is restored to the starting state, and the dust settles into the dust hopper. Then the program controller opens the lifting valve according to the specified interval time to resume the filtering of the first chamber, and then starts the lifting valve of the sub-chamber, closes the filtering air flow of the sub-chamber, opens the solenoid valve of the sub-chamber to release the high-pressure compressed air, s the air and pulses to spray and clean all the filter bags in the sub-chamber, and removes the dust on the filter bags of the sub-chamber. After that, the program controller opens the compartment lifting valve to resume the compartment filtering. After that, according to the pre-prescribed electronic control procedures for the third sub-room, the fourth sub-room... Until the dust removal of the last chamber is completed, close the electric control instrument, and the dust collector will resume formal filtration and dust collection.
Gas box pulse bag dust collector specifications:
Gas box pulse bag filter has four series of 33 specifications. Filter area from 93-4361m2, treatment air volume from 6900m3/h to 314000m3/h, widely used in building materials, cement, metallurgy, machinery, chemical and refractory industries; It is especially suitable for dust collection system (or dust removal system) of crushing, packing, warehouse top, clinker cooling machine and various mills in cement factory. It can also be applied to dust collection by coal grinding, but the anti-fire and explosion-proof measures should be added, and the structure of dust collector should be changed accordingly. It can also be applied to dust collection of gas with high dust concentration, such as the grinding system with O-SEPa powder separator, the gas dust concentration is up to 1000g/m3(standard) above, can not be set as a cyclone dust collector for pre-dust collection. For the cold region in north China, the dust collector can be applied after adding heating and heat preservation device.
Air box pulse bag dust collector structure
This is a kind of bag dust collector with compartment structure and assembly type. By the chamber top electromagnetic pulse valve, each chamber filter bag is carried out in turn by compartment stop air box pulse cleaning class (namely, the so-called offline cleaning). It and general injection pulse bag filter dust, soot blowing pulse is in the same filter indoor only to which each row of filter bag line by line to blowing dust (the so-called online soot cleaning), while other row of filter bag filter is still on, namely the soot mixed with filter in a room at the same time, under the qing secondary dust float in the sky, some will be adjacent dust filter bag away, It is not conducive to the gas filtration with high dust concentration. PPC subchamber pulse is carried out in an indoor shut-off valve to stop filtering, and without stopping to change a chamber filter bag.